The short answer
An up-and-over garage door typically costs £600–£1,200 supplied and fitted in 2026, making it the most affordable door type. Up-and-over doors swing up and back on a single panel using a simple counterbalanced mechanism, which keeps both the product and the fitting cost down. Material — steel, GRP (glass-reinforced plastic) or timber — finish, size and whether the door is automated all move the price. These are typical illustrations, not quotes — compare against the pillar cost guide and other door types.
Up-and-over doors remain the most common garage door on UK homes because they are simple, robust and the cheapest type to buy and fit. This guide sets out realistic 2026 supply-and-fit ranges for up-and-over doors by material, explains what affects the figure, and notes when another door type might suit better. All figures are typical illustrations rather than quotes. An up-and-over door can be fitted manually or with a motor; if automated, it should be fitted by a DHF-accredited garage door installer who handles the powered-door safety requirements.
Up-and-over door costs at a glance
- Steel up-and-over (supply & fit) £600–£1,000
- GRP up-and-over (supply & fit) £700–£1,200
- Timber up-and-over (supply & fit) £900–£1,500+
- Electric / automation uplift £300–£700 extra
- Operation Swings up and back on one panel
- Best for Simple, budget-friendly replacement
What an up-and-over garage door costs
A steel up-and-over door for a standard single garage typically costs £600–£1,000 supplied and fitted, with GRP (glass-reinforced plastic) doors a little more at £700–£1,200 and timber doors the most expensive at £900–£1,500 or more. The single-panel design uses a counterbalanced mechanism that is simpler than roller or sectional doors, which is why it remains the entry point on price. The door can be hung on a canopy frame (it projects forward as it opens) or a retractable frame (it draws back inside the garage); the surveyor will advise which suits your opening and any driveway constraints.
| Material | Single garage (supply & fit) | With electric operation |
|---|---|---|
| Steel | £600–£1,000 | £900–£1,500 |
| GRP | £700–£1,200 | £1,000–£1,700 |
| Timber | £900–£1,500+ | £1,200–£2,000+ |
What affects the price
Beyond material, the main cost drivers are size, finish and operation. A double-width door for a two-car garage costs more than a single. Colour, woodgrain and panelled designs add to a plain finish. Adding a motor for electric operation adds roughly £300–£700 — an existing sound up-and-over door can often be retrofitted, see electric garage door cost. Up-and-over doors are generally not insulated to the level of a sectional door, so if your garage is used as a room or workshop, weigh the alternatives in insulated garage doors and types of garage doors explained.
When another door type suits better
An up-and-over door is the value choice for a straightforward replacement, but it is not always the best fit. On a short driveway, the forward swing of a canopy door can be awkward, and a roller door that rolls straight up may suit better. Where insulation and security matter most — an attached garage or one used as living space — a sectional door is usually the stronger option despite the higher cost. Get at least three itemised quotes and compare on the same material, size and operation. This is general information; your figure depends on your garage and the quotes you receive.
Compare up-and-over garage door quotes
Prices vary between installers for the same door. Use our service to compare quotes from DHF-accredited installers in your area.
Frequently asked questions
How much does an up-and-over garage door cost fitted?
A steel up-and-over door for a single garage typically costs £600–£1,000 supplied and fitted, with GRP and timber costing more. It is the most affordable door type. These are typical illustrations, not quotes — get at least three itemised estimates.
Is an up-and-over door the cheapest type?
Yes — up-and-over doors are generally the cheapest type because the single-panel, counterbalanced mechanism is simpler to make and fit than roller or sectional doors. See types of garage doors.
Can an up-and-over garage door be automated?
Often yes — a sound up-and-over door can usually take a retrofit motor, adding roughly £300–£700. A powered door must meet the safety requirements for machinery and carry CE/UKCA marking, so the work should be done by a DHF-accredited installer. See electric garage door cost.
Are up-and-over doors insulated?
Most up-and-over doors are single-skin and not insulated to the level of a sectional door. If your garage is used as a room, gym or workshop, a sectional door is usually the better choice for warmth. See insulated garage doors explained.
Sources & further reading
- Door & Hardware Federation (DHF) — guidance on up-and-over doors, powered door safety and accredited installers
- Manufacturer guidance — up-and-over materials, canopy vs retractable frames and automation options
- Supply of Machinery (Safety) Regulations — safety requirements and CE/UKCA marking for powered doors
- Trade guidance — typical UK supply-and-fit costs for up-and-over garage doors
This is general information, not advice for your specific property or installation, and not a quote. Costs vary with your garage, the door you choose and your chosen installer. A powered garage door should be fitted by a DHF-accredited garage door installer. We are an independent information and introduction service, not an installer.